*Arduino : 1.8.0 (Windows 10), Carte : "Anet V1.0"

C:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\arduino-builder -dump-prefs -logger=machine -hardware C:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\hardware -tools C:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\tools-builder -tools C:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\hardware\tools\avr -built-in-libraries C:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\libraries -libraries C:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\portable\sketchbook\libraries -fqbn=anet:avr:anet -ide-version=10800 -build-path C:\Users\Serge\AppData\Local\Temp\arduino_build_76036 -warnings=none -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.avr-gcc.path=C:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\hardware\tools\avr -prefs=runtime.tools.arduinoOTA.path=C:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\hardware\tools\avr -prefs=runtime.tools.avrdude.path=C:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\hardware\tools\avr -verbose C:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\SkynetV2.3.2\SkynetV2.3.2.ino
C:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\arduino-builder -compile -logger=machine -hardware C:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\hardware -tools C:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\tools-builder -tools C:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\hardware\tools\avr -built-in-libraries C:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\libraries -libraries C:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\portable\sketchbook\libraries -fqbn=anet:avr:anet -ide-version=10800 -build-path C:\Users\Serge\AppData\Local\Temp\arduino_build_76036 -warnings=none -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.avr-gcc.path=C:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\hardware\tools\avr -prefs=runtime.tools.arduinoOTA.path=C:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\hardware\tools\avr -prefs=runtime.tools.avrdude.path=C:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\hardware\tools\avr -verbose C:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\SkynetV2.3.2\SkynetV2.3.2.ino
Using board 'anet' from platform in folder: C:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\hardware\anet\avr
Using core 'arduino' from platform in folder: C:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\hardware\arduino\avr
Detecting libraries used...
"C:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics  -flto -w -x c++ -E -CC -mmcu=atmega1284p -DF_CPU=16000000L -DARDUINO=10800 -DARDUINO_AVR_SANGUINO -DARDUINO_ARCH_AVR   "-IC:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\hardware\arduino\avr\cores\arduino" "-IC:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\hardware\anet\avr\variants\sanguino" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\SkynetV2.3.2.ino.cpp" -o "nul"
"C:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics  -flto -w -x c++ -E -CC -mmcu=atmega1284p -DF_CPU=16000000L -DARDUINO=10800 -DARDUINO_AVR_SANGUINO -DARDUINO_ARCH_AVR   "-IC:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\hardware\arduino\avr\cores\arduino" "-IC:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\hardware\anet\avr\variants\sanguino" "-IC:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\libraries\LiquidCrystal\src" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\SkynetV2.3.2.ino.cpp" -o "nul"
Using cached library dependencies for file: C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\M100_Free_Mem_Chk.cpp
Using cached library dependencies for file: C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\MarlinSerial.cpp
Using cached library dependencies for file: C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\Marlin_main.cpp
Using cached library dependencies for file: C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\Sd2Card.cpp
Using cached library dependencies for file: C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\SdBaseFile.cpp
Using cached library dependencies for file: C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\SdFatUtil.cpp
Using cached library dependencies for file: C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\SdFile.cpp
Using cached library dependencies for file: C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\SdVolume.cpp
Using cached library dependencies for file: C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\blinkm.cpp
Using cached library dependencies for file: C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\cardreader.cpp
Using cached library dependencies for file: C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\configuration_store.cpp
Using cached library dependencies for file: C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\dac_mcp4728.cpp
Using cached library dependencies for file: C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\digipot_mcp4451.cpp
Using cached library dependencies for file: C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\endstops.cpp
Using cached library dependencies for file: C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\mesh_bed_leveling.cpp
Using cached library dependencies for file: C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\planner.cpp
Using cached library dependencies for file: C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\planner_bezier.cpp
Using cached library dependencies for file: C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\printcounter.cpp
Using cached library dependencies for file: C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\qr_solve.cpp
Using cached library dependencies for file: C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\servo.cpp
Using cached library dependencies for file: C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\stepper.cpp
Using cached library dependencies for file: C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\stepper_dac.cpp
Using cached library dependencies for file: C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\stepper_indirection.cpp
Using cached library dependencies for file: C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\stopwatch.cpp
Using cached library dependencies for file: C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\temperature.cpp
Using cached library dependencies for file: C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\twibus.cpp
Using cached library dependencies for file: C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\ultralcd.cpp
Using cached library dependencies for file: C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\utility.cpp
Using cached library dependencies for file: C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\vector_3.cpp
Using cached library dependencies for file: C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\watchdog.cpp
Using cached library dependencies for file: C:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\libraries\LiquidCrystal\src\LiquidCrystal.cpp
Generating function prototypes...
"C:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics  -flto -w -x c++ -E -CC -mmcu=atmega1284p -DF_CPU=16000000L -DARDUINO=10800 -DARDUINO_AVR_SANGUINO -DARDUINO_ARCH_AVR   "-IC:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\hardware\arduino\avr\cores\arduino" "-IC:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\hardware\anet\avr\variants\sanguino" "-IC:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\libraries\LiquidCrystal\src" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\SkynetV2.3.2.ino.cpp" -o "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\preproc\ctags_target_for_gcc_minus_e.cpp"
"C:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\tools-builder\ctags\5.8-arduino11/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\preproc\ctags_target_for_gcc_minus_e.cpp"
Compilation du croquis...
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\M100_Free_Mem_Chk.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\MarlinSerial.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\Marlin_main.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\Sd2Card.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\SdBaseFile.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\SdFatUtil.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\SdFile.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\SdVolume.cpp.o
"C:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega1284p -DF_CPU=16000000L -DARDUINO=10800 -DARDUINO_AVR_SANGUINO -DARDUINO_ARCH_AVR   "-IC:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\hardware\arduino\avr\cores\arduino" "-IC:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\hardware\anet\avr\variants\sanguino" "-IC:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\libraries\LiquidCrystal\src" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\SkynetV2.3.2.ino.cpp" -o "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\SkynetV2.3.2.ino.cpp.o"
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\blinkm.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\cardreader.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\configuration_store.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\dac_mcp4728.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\digipot_mcp4451.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\endstops.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\mesh_bed_leveling.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\planner.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\planner_bezier.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\printcounter.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\qr_solve.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\servo.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\stepper.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\stepper_dac.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\stepper_indirection.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\stopwatch.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\temperature.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\twibus.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\ultralcd.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\utility.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\vector_3.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\watchdog.cpp.o
Compiling libraries...
Compiling library "LiquidCrystal"
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\libraries\LiquidCrystal\LiquidCrystal.cpp.o
Compiling core...
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\core\wiring_pulse.S.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\core\WInterrupts.c.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\core\hooks.c.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\core\wiring.c.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\core\wiring_analog.c.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\core\wiring_digital.c.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\core\wiring_pulse.c.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\core\wiring_shift.c.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\core\CDC.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\core\HardwareSerial.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\core\HardwareSerial0.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\core\HardwareSerial1.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\core\HardwareSerial2.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\core\HardwareSerial3.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\core\IPAddress.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\core\PluggableUSB.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\core\Print.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\core\Stream.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\core\Tone.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\core\USBCore.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\core\WMath.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\core\WString.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\core\abi.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\core\main.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\core\new.cpp.o
Utilisation du fichier déjà compilé : C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\core\core.a
Linking everything together...
"C:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\hardware\tools\avr/bin/avr-gcc" -w -Os -g -flto -fuse-linker-plugin -Wl,--gc-sections -mmcu=atmega1284p  -o "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036/SkynetV2.3.2.ino.elf" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\M100_Free_Mem_Chk.cpp.o" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\MarlinSerial.cpp.o" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\Marlin_main.cpp.o" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\Sd2Card.cpp.o" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\SdBaseFile.cpp.o" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\SdFatUtil.cpp.o" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\SdFile.cpp.o" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\SdVolume.cpp.o" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\SkynetV2.3.2.ino.cpp.o" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\blinkm.cpp.o" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\cardreader.cpp.o" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\configuration_store.cpp.o" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\dac_mcp4728.cpp.o" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\digipot_mcp4451.cpp.o" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\endstops.cpp.o" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\mesh_bed_leveling.cpp.o" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\planner.cpp.o" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\planner_bezier.cpp.o" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\printcounter.cpp.o" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\qr_solve.cpp.o" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\servo.cpp.o" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\stepper.cpp.o" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\stepper_dac.cpp.o" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\stepper_indirection.cpp.o" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\stopwatch.cpp.o" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\temperature.cpp.o" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\twibus.cpp.o" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\ultralcd.cpp.o" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\utility.cpp.o" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\vector_3.cpp.o" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\sketch\watchdog.cpp.o" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036\libraries\LiquidCrystal\LiquidCrystal.cpp.o" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036/core\core.a" "-LC:\Users\Serge\AppData\Local\Temp\arduino_build_76036" -lm
"C:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\hardware\tools\avr/bin/avr-objcopy" -O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0  "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036/SkynetV2.3.2.ino.elf" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036/SkynetV2.3.2.ino.eep"
"C:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\hardware\tools\avr/bin/avr-objcopy" -O ihex -R .eeprom  "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036/SkynetV2.3.2.ino.elf" "C:\Users\Serge\AppData\Local\Temp\arduino_build_76036/SkynetV2.3.2.ino.hex"
Utilisation de la bibliothèque LiquidCrystal version 1.0.5 dans le dossier: C:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\libraries\LiquidCrystal 
Le croquis utilise 116624 octets (88%) de l'espace de stockage de programmes. Le maximum est de 131072 octets.
Les variables globales utilisent 4509 octets de mémoire dynamique.
C:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\hardware\tools\avr/bin/avrdude -CC:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\hardware\tools\avr/etc/avrdude.conf -v -patmega1284p -carduino -PCOM3 -b57600 -D -Uflash:w:C:\Users\Serge\AppData\Local\Temp\arduino_build_76036/SkynetV2.3.2.ino.hex:i 

avrdude: Version 6.3, compiled on Dec 16 2016 at 13:33:19
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2014 Joerg Wunsch

         System wide configuration file is "C:\Users\Serge\Desktop\Anet 8 Instructions\Skynet3d-master\arduino-1.8.0\hardware\tools\avr/etc/avrdude.conf"

         Using Port                    : COM3
         Using Programmer              : arduino
         Overriding Baud Rate          : 57600
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0xd6
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x6f
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x80
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0xbf
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0xae
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0xd6
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x02
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x21
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0xcc
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0xd6

avrdude done.  Thank you.

Une erreur est survenue lors du transfert du croquis